Forums Anyscript.org  

Go Back   Forums Anyscript.org > Professional Forum > AnyGait

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 08-24-2017, 08:39 PM
sakshiagarwal sakshiagarwal is offline
Junior Member
 
Join Date: Jul 2015
Posts: 13
Default Adding Payload in Mocap Model

HI, I am carrying out a study of analysis of carrying a backpack load in Mocap Model. Before this study, first I attached the payload on standing human, which I could do it successfully. But when it comes to attaching the payload in Mocap Model, I am facing issues as the code runs without any error but when I carry out analysis study, I cant see human model attached with payload. Can some one guide me where I am mistaking in my code. I am attaching files for reference.
Attached Files
File Type: zip PayLoad Analysis.zip (1.59 MB, 5 views)
Reply With Quote
  #2  
Old 08-28-2017, 03:15 PM
toerholm's Avatar
toerholm toerholm is offline
AnyBody Support
 
Join Date: Feb 2009
Posts: 924
Default

Hi sakshiagarwal

It looks like you have two sets of constraints working on the backpack model.
You have soft constraints between backpack and human which looks apparently ok, but you seem also to have 6 hard constraints between backpack and the ground.

These are defined in bottom of your backpack assembly, generated by SolidWorks, these constraints prevent the backpack from moving with the pelvis, they need to be removed.

Best regards
Søren
__________________
TIP: How to save and load results.
http://wiki.anyscript.org/index.php/All_about_AnyBody_Modeling_System#Save_Load_and_Re play_Results

Subscribe to the forums, click the 'Forum Tools' link above the list of threads then select 'Subscribe to Forum'. You will then have the option to choose the subscription mode for this forum and get an email automatically.
Reply With Quote
  #3  
Old 08-29-2017, 07:42 AM
sakshiagarwal sakshiagarwal is offline
Junior Member
 
Join Date: Jul 2015
Posts: 13
Default

Thanks Søren

As you rightly pointed out the mistake which i was making, I commented Anyfolder Mates in Backpack assembly file and now I could see the model walking with the payload..

Thanks for your support.
Reply With Quote
  #4  
Old 09-01-2017, 01:14 PM
sakshiagarwal sakshiagarwal is offline
Junior Member
 
Join Date: Jul 2015
Posts: 13
Default

Soren,

When I tried running the simulation of payload with mocap model, I could not see the weight of payload added to the mocap model (Fz component in Force plate 1, 2 ,3).

Can you tell where I need to make changes in the code to involve weight of payload in inverse dynamic study
Reply With Quote
  #5  
Old 09-07-2017, 09:16 AM
toerholm's Avatar
toerholm toerholm is offline
AnyBody Support
 
Join Date: Feb 2009
Posts: 924
Default

Hi sakshiagarwal,

In a normal mocap model the ground reaction are measured and applied. If you have experimental data with payload included you can reuse this concept and the only thing you will need to do is to add the backpack into the model with the right weight.

If on the other hand you do not have experimental data with the payload you will have to do GRF predictions, please see www.anyscript.org for details on this. To predict the GRF it requires you to have fullbody kinematics measured.

Best regards
Søren
__________________
TIP: How to save and load results.
http://wiki.anyscript.org/index.php/All_about_AnyBody_Modeling_System#Save_Load_and_Re play_Results

Subscribe to the forums, click the 'Forum Tools' link above the list of threads then select 'Subscribe to Forum'. You will then have the option to choose the subscription mode for this forum and get an email automatically.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 06:05 PM.